About Drill Bits

An annular cutter (also called as core drill, core cutter, broach cutter, Trepanning drill, hole saw, or cup-type cutter) is a hollow, multiple cutting edges cutting tool used to make/drill holes in ferrous and non-ferrous metals. An annular cutter cuts only an annular groove at the periphery of the hole and leaves a solid core or slug at the hole center. Annular cutter is a substitute for slower, more expensive and less efficient Twist drills and Hole saws. The function of Annular Cutters is more or less same as a hole saw but differs in geometry and material. Annular cutters are faster, easier and are more accurate than the conventional twist drills or drill bits.

An annular cutter or core drill removes the material from the metal to create cylindrical holes in a circular cross section. An annular cutter, unlike drill bits, cuts only on the periphery of the hole to be made. Annular cutters use almost the same method as concrete core drills, but are for metal drilling. An annular cutter is a multipoint cutting tool and is made from material like high speed steel and tungsten carbide tips.

Annular cutters are available in different sizes generally starting from diameter 12 mm (1/2’’) to 200 mm (7 7/8’’) and larger if required. The length of the annular cutter can be achieved depending upon the thickness of the material to be drilled. In the market the lengths 30 mm, 55 mm, 75 and 110 mm annular cutters are popularly available. These sizes though vary from manufacturer to manufacturer. The annular cutter’s material should be harder than the material to be drilled. Therefore there are various types of material used to manufacture annular cutters, for example different types HSS and TCT material. Annular cutters are also called as core drills because, after drilling hole, the drilled material is ejected from the cutter in the form of a cylindrical blank, this blank is called a core.

The first annular cutter was invented by Mr. Dough Hougen which he patented in 1973. The High Speed Steel annular cutter was invented in 1983 by Michael Beharry and the tungsten carbide tipped annular cutter was invented in 1985 by Mr. Mikiya Toshio and Mr. Shoji Michihiro.

Though people use annular cutters on conventional drilling machines like radial drilling machines or pillar drilling machine, it is not recommended because these machines have very high RPM which creates high tool breakage risk for annular cutters as they are hollow unlike solid twist drills. It is always recommended to use an annular cutter or core drill with a magnetic core drilling machine (also called as magnetic dril, magnetic base drilling machine, etc.) as these machines are slower. A magnetic drilling machine is ideally made for using annular cutters (Source : www.wikipedia.com).

High Speed Steel. CBN-ground. suitable for all magnetic drill machines

Application :

For drilling steel (T-steel-girder. H-Beam). cast steel. non-ferrous metal.

Ø MM
mm Cutting Depth (mm)
12.0 35
13.0 35
14.0 35
15.0 35
16.0 35
17.0 35
18.0 35
19.0 35
20.0 35
21.0 35
22.0 35
23.0 35
24.0 35
25.0 35
26.0 35
27.0 35
28.0 35
29.0 35
30.0 35
31.0 35
32.0 35
33.0 35
34.0 35
35.0 35
36.0 35
37.0 35
38.0 35
39.0 35
40.0 35
41.0 35
42.0 35
43.0 35
44.0 35
45.0 35
46.0 35
47.0 35
48.0 35
49.0 35
50.0 35
51.0 35
52.0 35
53.0 35
54.0 35
55.0 35
56.0 35
57.0 35
58.0 35
59.0 35
60.0 35
Ø MM
mm Cutting Depth (mm)
12.0 50
13.0 50
14.0 50
15.0 50
16.0 50
17.0 50
18.0 50
19.0 50
20.0 50
21.0 50
22.0 50
23.0 50
24.0 50
25.0 50
26.0 50
27.0 50
28.0 50
29.0 50
30.0 50
31.0 50
32.0 50
33.0 50
34.0 50
35.0 50
36.0 50
37.0 50
38.0 50
39.0 50
40.0 50
41.0 50
42.0 50
43.0 50
44.0 50
45.0 50
46.0 50
47.0 50
48.0 50
49.0 50
50.0 50
51.0 50
52.0 50
53.0 50
54.0 50
55.0 50
56.0 50
57.0 50
58.0 50
59.0 50
60.0 50
Ø MM
mm Cutting Depth (mm)
18.0 100
19.0 100
20.0 100
21.0 100
22.0 100
23.0 100
24.0 100
25.0 100
26.0 100
27.0 100
28.0 100
29.0 100
30.0 100
31.0 100
32.0 100
33.0 100
34.0 100
35.0 100
36.0 100
37.0 100
38.0 100
39.0 100
40.0 100